Toolchain Installation
The supported platforms for PX4 development are:
Ubuntu Linux (Recommended)
Supported Targets
The table below shows what PX4 targets you can build on each OS.
Target | Linux (Ubuntu) | Mac | Windows |
---|---|---|---|
NuttX based hardware: Pixhawk Series, Crazyflie, Intel® Aero Ready to Fly Drone | ✓ | ✓ | ✓ |
Linux-based hardware: Raspberry Pi 2/3 | ✓ | ||
Simulation: jMAVSim SITL | ✓ | ✓ | ✓ |
Simulation: Gazebo SITL | ✓ | ✓ | |
Simulation: ROS with Gazebo | ✓ |
Experienced Docker users can also build with the containers used by our continuous integration system: Docker Containers
Next steps
Once you have finished setting up one of the command-line toolchains above:
Install VSCode (if you prefer using an IDE to the command line).
Install the QGroundControl Daily Build
Continue to Building PX4 Software.
Last updated