罗盘

罗盘校准过程配置了所有连接的外部和内部 magnetometers。 QGroundControl 将指定您把飞行器定位在一系列方向并在指定轴上旋转飞行器。

You will need to calibrate your compass on first use, and you may need to recalibrate it if the vehicles is ever exposed to a very strong magnetic field, or if it is used in an area with abnormal magnetic characteristics. Indications of a poor compass calibration include multicopter circling during hover, toilet bowling (circling at increasing radius/spiraling-out, usually constant altitude, leading to fly-way), or veering off-path when attempting to fly straight.

执行校准

The calibration steps are:

Choose a location away from large metal objects or magnetic fields.

Metal is not always obvious! Avoid calibrating on top of an office table (often contain metal bars) or next to a vehicle. Calibration can even be affected if you're standing on a slab of concrete with uneven distribution of re-bar.

打开 QGroundControl 并连接上飞机。
在工具栏选择齿轮图标（机体设置），然后在侧边栏选择 传感器。
点击 Compass 传感器按钮。
点击确定开始校准。
把你的飞机放置在下面显示的某一个方向，并保持静止。随后提示（方向图像变为黄色）在指定方向旋转飞行器。该位置标定完成后，屏幕上的相应图示将变成绿色。
在机体的所有方向上重复校准步骤。

Once you've calibrated the vehicle in all the positions QGroundControl will display Calibration complete (all orientation images will be displayed in green and the progress bar will fill completely). You can then proceed to the next sensor.