加速度计

You will need to calibrate your accelerometer on first use or if the flight controller orientation is changed. Otherwise you should not need to recalibrate (except perhaps in winter, if you have a flight controller that was not thermally calibrated in the factory).

QGroundControl will guide you to place and hold your vehicle in a number of orientations (you will be prompted when to move between positions).

This is similar to compass calibration except that you hold the vehicle still (rather than rotate it) in each orientation.

执行校准

The calibration steps are:

打开 QGroundControl 并连接上飞机。
在工具栏选择齿轮图标（机体设置），然后在侧边栏选择 传感器。
点击 加速度计 传感器按钮。
点击确定开始校准。
按照屏幕上的图示引导，将机体翻转到指定位置。看到 (图示位置变成黄色) 的提示，握紧机体并保持静止。该位置标定完成后，屏幕上的相应图示将变成绿色。
在机体的所有方向上重复校准步骤。

Once you've calibrated the vehicle in all the positions QGroundControl will display Calibration complete (all orientation images will be displayed in green and the progress bar will fill completely). You can then proceed to the next sensor.