系统
battery_simulator
Source: modules/simulator/battery_simulator
描述
用法
battery_status
Module to provide persistent storage for the rest of the system in form of a simple database through a C API. Multiple backends are supported:
描述
模块提供的功能包括:
从 ADC 驱动读取电池状态(通过 ioctl 接口),并且发布到主题
battery_status
。
实现
模块运行在它自己的线程中,并轮询当前选定的陀螺仪主题。
用法
camera_feedback
DM_KEY_FENCE_POINTS and DM_KEY_SAFE_POINTS items: the first data element is a mission_stats_entry_s
struct, which stores the number of items for these types. These items are always updated atomically in one transaction (from the mavlink mission manager). During that time, navigator will try to acquire the geofence item lock, fail, and will not check for geofence violations.
描述
用法
commander
描述
该模块包含飞行模式切换和失效保护状态机。
描述
dataman
源码: modules/dataman
描述
该模块通过基于C语言的API以简单数据库的形式为系统的其他部分提供持续性存储功能。 支持多种后端:
a file (eg. on the SD card)
FLASH(需要飞控板支持)
It is used to store structured data of different types: mission waypoints, mission state and geofence polygons. Each type has a specific type and a fixed maximum amount of storage items, so that fast random access is possible. 每种类型的数据都有一个特定的类型和一个固定的最大存储条目的数量,因此可以实现对数据的快速随机访问。
实现
单个数据的读取和写入是原子操作。 Reading and writing a single item is always atomic. If multiple items need to be read/modified atomically, there is an additional lock per item type via dm_lock
.
DM_KEY_FENCE_POINTS and DM_KEY_SAFE_POINTS items: the first data element is a mission_stats_entry_s
struct, which stores the number of items for these types. 这些项在每一次通讯过程中都会进行原子更新(与mavlink 任务管理器)。 在程序运行时,导航模块会尝试去锁定地理围栏,如果失败的话,就不会去检查是否越界了地理围栏。
用法
dmesg
maybe_landed: it requires ground_contact together with a tighter thrust setpoint threshold and no velocity in the horizontal direction. The trigger time is defined by MAYBE_LAND_TRIGGER_TIME. When maybe_landed is detected, the position controller sets the thrust setpoint to zero.
示例
用于显示启动控制台消息的命令行工具 需要注意的是,NuttX系统的工作队列和系统日志输出都未被捕捉到。
示例
持续在后台打印所有消息。
描述
esc_battery
Source: modules/esc_battery
描述
Background process running periodically with 1 Hz on the LP work queue to calculate the CPU load and RAM usage and publish the cpuload
topic.
描述
gyro_calibration
On NuttX it also checks the stack usage of each process and if it falls below 300 bytes, a warning is output, which will also appear in the log file.
描述
描述
heater
这个模块将以后台进程的形式在低优先级工作队列中周期性运行,从而实现将 IMU 的温度调节到设定值。
描述
用法
land_detector
通过设置 SENS_EN_THERMAL 参数或者命令行接口,可以使得该任务在运行启动脚本时就开始工作。
描述
This task can be started at boot from the startup scripts by setting SENS_EN_THERMAL or via CLI.
实现
load_mon
Source: modules/land_detector
用法
ground_contact: thrust setpoint and velocity in z-direction must be below a defined threshold for time GROUND_CONTACT_TRIGGER_TIME_US. When ground_contact is detected, the position controller turns off the thrust setpoint in body x and y. 当检测到 ground_contact 状态时,位置控制器将关闭机体 x 方向和 y 方向上的推力设定值。
描述
Every type is implemented in its own class with a common base class. 触发时间由变量 MAYBE_LAND_TRIGGER_TIME 定义。 当检测到 maybe_landed 状态时,位置控制器会将推理设定值设置为零。 A hysteresis and a fixed priority of each internal state determines the actual land_detector state.
多旋翼的 Land Detector
ground_contact: thrust setpoint and velocity in z-direction must be below a defined threshold for time GROUND_CONTACT_TRIGGER_TIME_US. When ground_contact is detected, the position controller turns off the thrust setpoint in body x and y.
maybe_landed: it requires ground_contact together with a tighter thrust setpoint threshold and no velocity in the horizontal direction. The trigger time is defined by MAYBE_LAND_TRIGGER_TIME. When maybe_landed is detected, the position controller sets the thrust setpoint to zero.
There are 2 environment variables used for configuration: replay
, which must be set to an ULog file name - it's the log file to be replayed. The second is the mode, specified via replay_mode
:
用法
logger
The module is typically used together with uORB publisher rules, to specify which messages should be replayed. The replay module will just publish all messages that are found in the log. It also applies the parameters from the log.
描述
On NuttX it also checks the stack usage of each process and if it falls below 300 bytes, a warning is output, which will also appear in the log file.
实现
logger
该模块支持 2 个后端:
示例
System logger which logs a configurable set of uORB topics and system printf messages (PX4_WARN
and PX4_ERR
) to ULog files. These can be used for system and flight performance evaluation, tuning, replay and crash analysis.
It supports 2 backends:
文件:写入 ULog 文件到文件系统中(SD 卡)
MAVLink: 通过 MAVLink 将 ULog 数据流传输到客户端上(需要客户端支持此方式)
模块的实现使用了两个线程:
In between there is a write buffer with configurable size (and another fixed-size buffer for the mission log). It should be large to avoid dropouts. 缓冲区应大到可以避免出现数据溢出。 It can be enabled and configured via SDLOG_MISSION parameter. The normal log is always a superset of the mission log.
用法
立刻开始记录日志的典型用法:
The main thread, running at a fixed rate (or polling on a topic if started with -p) and checking for data updates
写入线程,将数据写入文件中、
In between there is a write buffer with configurable size (and another fixed-size buffer for the mission log). It should be large to avoid dropouts.
参数描述
Typical usage to start logging immediately:
Or if already running:
用法
mag_bias_estimator
Source: modules/mag_bias_estimator
参数描述
Online magnetometer bias estimator.
实现
replay
Source: systemcmds/netman
Description Network configuration manager saves the network settings in non-volatile memory. On boot the update
option will be run. If a network configuration does not exist. The default setting will be saved in non-volatile and the system rebooted. On Subsequent boots, the update
option will check for the existence of net.cfg
in the root of the SD Card. It will saves the network settings from net.cfg
in non-volatile memory, delete the file and reboot the system.
update
option will be run. If a network configuration does not exist. The default setting will be saved in non-volatile and the system rebooted. On Subsequent boots, the update
option will check for the existence of net.cfg
in the root of the SD Card. It will saves the network settings from net.cfg
in non-volatile memory, delete the file and reboot the system.The save
option will net.cfg
on the SD Card. Use this to edit the settings. The show
option will display the network settings to the console.
Examples $ netman save # Save the parameters to the SD card. $ netman show # display current settings. $ netman update -i eth0 # do an update
用法
send_event
Source: drivers/pwm_input
参数描述
The replay procedure is documented on the System-wide Replay page.
用法
sensors
源码: modules/events
参数描述
The rc_update module handles RC channel mapping: read the raw input channels (input_rc
), then apply the calibration, map the RC channels to the configured channels & mode switches and then publish as rc_channels
and manual_control_setpoint
.
用法
To reduce control latency, the module is scheduled on input_rc publications.
参数描述
replay
Source: modules/replay
实现
This module is used to replay ULog files.
There are 2 environment variables used for configuration: replay
, which must be set to an ULog file name - it's the log file to be replayed. The second is the mode, specified via replay_mode
:
replay_mode=ekf2
: 指定 EKF2 回放模式。replay_mode=ekf2
: specific EKF2 replay mode. It can only be used with the ekf2 module, but allows the replay to run as fast as possible.Generic otherwise: this can be used to replay any module(s), but the replay will be done with the same speed as the log was recorded.
The module is typically used together with uORB publisher rules, to specify which messages should be replayed. The replay module will just publish all messages that are found in the log. It also applies the parameters from the log.
The replay procedure is documented on the System-wide Replay page.
用法
tune_control
Source: modules/events
参数描述
Background process running periodically on the LP work queue to perform housekeeping tasks. It is currently only responsible for tone alarm on RC Loss.
The tasks can be started via CLI or uORB topics (vehicle_command from MAVLink, etc.).
用法
work_queue
Source: modules/sensors
参数描述
The sensors module is central to the whole system. It takes low-level output from drivers, turns it into a more usable form, and publishes it for the rest of the system.
播放系统蜂鸣声 #2 :
读取传感器驱动的输出 (例如,
sensor_gyro
等)。 如果存在多个同类型传感器,那个模块将进行投票和容错处理。 然后应用飞控板的旋转和温度校正(如果被启用)。 最终发布传感器数据:其中名为sensor_combined
的主题被系统的许多部件所使用。Make sure the sensor drivers get the updated calibration parameters (scale & offset) when the parameters change or on startup. The sensor drivers use the ioctl interface for parameter updates. For this to work properly, the sensor drivers must already be running when
sensors
is started. 传感器驱动使用 ioctl 接口获取参数更新。 为了使这一功能正常运行,当sensors
模块启动时传感器驱动必须已经处于运行状态。Do preflight sensor consistency checks and publish the
sensor_preflight
topic.
示例
It runs in its own thread and polls on the currently selected gyro topic.
用法
tattu_can
Source: drivers/tattu_can
参数描述
Driver for reading data from the Tattu 12S 16000mAh smart battery.
用法
temperature_compensation
Source: modules/temperature_compensation
Description
The temperature compensation module allows all of the gyro(s), accel(s), and baro(s) in the system to be temperature compensated. The module monitors the data coming from the sensors and updates the associated sensor_correction topic whenever a change in temperature is detected. The module can also be configured to perform the coeffecient calculation routine at next boot, which allows the thermal calibration coeffecients to be calculated while the vehicle undergoes a temperature cycle.
Usage
tune_control
Source: systemcmds/tune_control
Description
Command-line tool to control & test the (external) tunes.
Tunes are used to provide audible notification and warnings (e.g. when the system arms, gets position lock, etc.). The tool requires that a driver is running that can handle the tune_control uorb topic.
Information about the tune format and predefined system tunes can be found here: https://github.com/PX4/Firmware/blob/master/src/lib/tunes/tune_definition.desc
Examples
Play system tune #2:
Usage
work_queue
Source: systemcmds/work_queue
Description
Command-line tool to show work queue status.
Usage
Last updated